multifun COZY BOX Bedienungsanleitung Seite 9

17. Ensure the heater is on a stable, secure surface to eliminate the potential of tipping it over.
18. We do not recommend use of an extension cord as it may overheat and cause a risk of fire.
However, if you have to use an extension cord, the cord should be No. 12 AWG minimum size
and rated not less than 2550 watts, and has to be used only for supplying power to this heater.
19. Be sure that the plug is fully inserted into appropriate receptacle. Please remember that
receptacles also deteriorate due to aging and continuous use: check periodically for signs of
overheating or deformations evidenced by the plug. Do not use the receptacle which
overheating and deformation and CALL your electrician.
20. Check that neither the appliance nor the power cable has been damaged in any way during
transportation.
21. Make sure that no pieces of polystyrene or other packaging material have been left between
elements of the appliance. It may be necessary to pass over the appliance with a vacuum
cleaner.
22. The appliance is not to be used by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction.
23. Children being supervised not to play with the appliance.
24. In order to avoid overheating, do not cover the heater. Heater is not located immediately
below a socket-outlet. The heater is to be installed which switches and other controls cannot be
touched by a person in the bath or shower.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT,
FULLY INSERTED.
Operation instruction:
● Check the household voltage to ensure it matches the appliance's rated specification. Be
sure to plug into a AC 220~240V, 50/60Hz outlet.
● Heater is equipped with 2 power settings. When switch turn to 'O' position, the heater is
power off. Switch turn to 'I' position the fan-motor will run, turn the Thermostat to '▼'
position for desired temperature.
Thermostat
'Max' position
'O' position,
power off
'I' position,
power on
7