multifun COZY BOX Bedienungsanleitung Seite 10

● There is a red indicator light in the front of heater. When the heater is working, it will light
up. When heater stops working, it will light off.
● Adjust the thermostat to 'Max' position or select the desired power setting.
Once the room is comfortable, rotate the thermostat counter clockwise, until the heater
shuts off. The thermostat will keep the temperature by cycling the heater on or off during
particularly cold weather, the low power setting may be insufficient to satisfy the thermostat.
Select a higher setting for these periods.
● This heater features Overheat Protection. When the heater overheat from inside, the
thermal function will cut-off automatically and stop the heating. After the unit cool down, the
user need to pull the plug from socket to reset the thermal cut-off. After that, plug-in again
and the heater will resume operation normally. (Note: we recommend leaving the heater
unplugged for 10 min to guarantee the thermal reset).
Installation:
1. User should take out the handle and supporting foot from package.
2. Put the handle on the top and fix the screw holes. Use the screws to tight the handle.
Please ensure to put the handle on the top correctly, the front side is lower than the back side.
3. For the support foot, turn over the heater and put the support foot on the bottom, press it
into the holes, then lock the screws on the bottom.
handle
screw holes
support foot
8