Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Main Functions and Components
BLUE
= > 275 °C
GREEN
= 276°C – 325°C (Empfohlener Temperaturbereich)
RED
= < 326°C
Please make sure that the sensor is not pressed firmly onto the surfaces to be
measured. The sensor only has to rest on the surface.
7
6
5
4
3
2
1
1. Switch on the thermometer by briefly and
quickly pressing the On/Off button (5) 3 times.
2. Use the button (4) to select Celsius or
Fahrenheit.
3. Hold the sensor of the measuring device at the
point to be measured. Make sure that the
sensor is correctly or completely in contact with
the surface to be measured to obtain an
accurate measurement.
4.
Note:
✔ EEE on the display indicates that the sensor is
broken.
✔ The device switches off automatically after 3
minutes.
✔ The setting Celsius or Fahrenheit is
automatically and permanently saved when the
unit is first set. If you want to change the setting
just change the setting. The unit will
automatically save the setting for the next use.
Page 25
Werbung
Inhaltsverzeichnis
