Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Safety Instructions
Page 23
Please have a look at the manufacturer's descriptions when using this object.
● Always keep the product out of reach of children.
● Make sure that the appliance has cooled down completely before cleaning
and maintenance. When the unit has cooled down completely, you can clean
it with a damp cloth.
● Do not immerse the unit, power cord or plug in water or any other liquid.
● Do not place the object on or near a gas or electric burner, stove or other
heat source.
● Do not operate the product with a USB cable or connector that is not in a
good condition.
● Do not leave any cables near a heat source. It may deform the cord or melt
the insulation and cause an electric shock or fire.
● Do not open the product or attempt to repair it by yourself.
● Risk of electric shock! DO NOT touch the plug, cord or device with wet
hands
● If you need to unplug the power cord, you may always do so by removing
the plug. Pulling on the cord can damage it.
● Do not scratch, cut, twist, bend, tie or place a heavy object on the cord.
● Do not let the cord hang over the edge of the table. To avoid tripping over
cables that are bent by accident, simply place it in a suitable position. This
way, other people will not touch such element.
● Do not connect too many plugs into the same electrical outlet.
● Do not connect the machine if the mechanisms do not work properly due
to possible knocks, falls or last-minute damage.
● Fire hazard! While the press is in operation, do not cover its main parts
with a cloth or blanket during operation.
● No modifications, alterations or readjustments are permitted. The
company is not responsible for damages caused by an improper use of the
device.
Werbung
Inhaltsverzeichnis
