English - Sweet Protection ASCENDER Handbuch

English

READ THE FOLLOWING BEFORE USE!
AREA OF USE:
This helmet was developed solely for skiing, snowboarding and
mountaineering. It is not suitable for moped riders, motorcyclists, or any other
form of motorized activity.
WARNING!
No helmet can protect the wearer from all potential injuries in all accidents.
Depending on the strength of impact, even an accident at very low speed can
cause serious injury or death. This helmet is designed to protect your head. It
does not offer protection from injuries to the neck, the spinal column, or other
parts of the body at risk in an accident. For maximum protection, this helmet
must be fitted and attached properly to the wearer's head in accordance with
this user manual.
WARNING!
This helmet may, after sustaining an impact, be damaged to the point that
it is no longer adequate to protect the head against further impacts. This
damage may not be visible. If this helmet has sustained an impact it should
be returned to Sweet Protection for competent inspection or be discarded
and replaced.
WARNING!
Children should not wear the helmet while climbing or engaging in other
similar activities due to the strangulation risk from the helmet straps.
WARNING!
Action sports (skiing, snowboarding, kayaking, white water sports, mountain
biking etc.) are inherently dangerous, since they involve speed, heights,
natural and man-made obstacles and physical exertion. This product is
scientifically designed to reduce the probability of injury when used properly.
However, Active Brands AS makes no claims that this helmet will eliminate all
risk of injury even when properly worn. For maximum protection, this helmet
must be fitted properly and all adjustments secured. All our helmets are
thoroughly tested and certified for their specific branch of sports and intended
use. Never use a helmet for activities it is not intended for.
OCCIGRIP:
Your helmet features OCCIGRIP adjustment.
Please follow the diagram instructions for how
to make the proper adjustments.
FIT PADS:
If your helmet is supplied with FIT PADS, Please follow the description in the
Fit Pad manual.
USER INSTRUCTIONS:
Allow the necessary time for adjustments the first time you try a new helmet.
If the fitting procedure seems complicated, ask the retailer to help you adjust
for a good fit. Test your helmet fit each time you put it on. Adjust as needed.
If the helmet is to be worn by a child, it must be fitted and adjusted by an adult.
6