Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
GB
GENERAL SAFETY WARNINGS
severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
INTENDED USE
The contained charger is intended for use with PERUN battery
pack.
TECHNICAL DATA
Battery charger Model
Input
Output
Protection class
OPERATION
Charging the battery pack
NOTE: Remove the battery pack from the charger after it
has been fully charged.
NOTE: Battery should be fully charged before first use.
NOTE: Make sure the mains voltage is the same as rating
label which is located on the charger.
1.
Connect the charger to a power supply. The red LED
will light up.
2.
To insert the battery pack into the charger, align the
raised ribs of the battery pack with the grooves of the
charger then push it in.
3.
The green LED light of the charger will flash
continuously during normal charging.
4.
After charging is complete, the green LED will light
up.
R
AL C20D
220-240 V ～, 50/60 Hz 120 W
21 V
, 4 A
II
6
MAINTENANCE AND STORAGE
Maintenance and Cleaning
Occasionally clean the battery using a soft, clean and dry brush.
Disposal
Battery chargers, accessories and packaging should be sorted for environmental-friendly
recycling.
Do not dispose of battery chargers into household waste!
Only for EC countries:
According to the European Guideline 2012/19/EU for Waste Electrical and
Elec- tronic Equipment and its implementation into national right, battery
chargers that are no longer usable must be collected sepa- rately and
disposed of in an environmental correct manner.
CE DECLARATION
To the provisions of Council Directives
MEROTEC GmbH
Otto-Brenner-Str. 8
47877 Willich, Germany
Declare that the product:
Machine Description: 20V Charger
AL C20D
B0Q-SP07-2040ZA / B0Q-SP07-2040ZB
Function: Charging battery
Complies with the essential health and safety requirements of the following directives:
Low Voltage Directive 2014/35/EU
Electromagnetic Compatibility Directive 2014/30/EU
EC Directive 2011/65/EU and its amendment Directive (EU) 2015/863 (RoHS)
Standards and technical specification referred to :
EN 60335-1: 2012+A11+A13 EN 60335-2-29: 2004+A2+A11
EN 55014-1: 2017 EN 55014-2: 2015 EN 55014-1:2006+A1+A2
EN 61000-3-2: 2014 EN 61000-3-3: 2013
EN 50581: 2012 EN62233: 2008
Authorized Signatory
Date: 24.03.2020
Signature:________________________
Place: Willich
Name: Roland Menken
General Manager
The object of the declaration described above satisfies the provisions of directive 2011/65/EU
of the European Parliament and the Council of 8 June 2011 on limiting the use of certain harm-
ful substances in electrical and electronic appliances.
We
7
R
Werbung
Inhaltsverzeichnis
