Memory Function - Q-link EcoSavers Bedienungsanleitung

Lower part of the LCD display
This part of the LCD screen shows the duration of the measurement of the energy
consumption. In the first hour it shows the minutes and seconds: after 1 hour it shows
the hours and minutes. After 24 hours the time measurement starts again at 00:00

Memory function

This product has a memory function and uses a built-in capacitor for this function.
This capacitor can store the data for at least 20 minutes, so you will have 20 minutes in
case you want to measure another appliances on another mains socket.
The display may disappear during switching to another socket, but this can be restored by
pressing any button.
In case you did not use the energy meter > 20 minutes, you might re-program the cost
per KWh as described above and the measuring data will be lost.
RESET
I fan abnormal display appears or the buttons do not respond well, please reset the energy
meter. Use a sharp object (i.e. a pencil) to press the reset button (E in fig. 1)
Input: 230V~ 50Hz 33680W max
Max. Load: 16A 3680W
Current measuring range: 0.005A-16A
Voltage measuring range: 200V~ - 276V~
Power measuring range: 0.1W~ 3680W
Energy consumption measuring range:
0.0kWh-9999.9kWh
3