Before You Start; Getting Started; Connecting To Your Wifi Network - Audizio 102.231 Bedienungsanleitung

BEFORE YOU START

Please ensure the following is ready:
•
You have a broadband internet connection.
•
A wireless broadband router is connected to the internet successfully. The radio supports Wireless B, G and N
connection (Wireless N router can also be used with the setting on B or G).
•
You know the Wired Equivalent Privacy (WEP) or Wi-Fi Protected Access (WPA) data encryption code/password. You
need to key in the correct code when the radio is connected to the wireless router for network connection. If you do
not know the code/password, please contact the person/technician who set up the router/network for you.
•
The radio can work via Wireless network connection (Wi-Fi connection)

GETTING STARTED

Connect the mains adaptor to the radio unit, one end to the DC IN on the radio and the other end to the mains wall outlet.
Caution: Use only the mains adaptor supplied with the radio. Connecting a power supply with a different rating will cause
permanent damage to the radio and may be hazardous.
The display on the front of the radio will light up and show:
Then you can select your prefer language on the radio.
It will ask you if you want to Enable the <Check Network when Power on>, it is suggested to choose <Yes>. Then the radio
will always check the available WiFi network automatically.

CONNECTING TO YOUR WIFI NETWORK

The screen below will appear. You can choose <Yes> to proceed to search for the available WiFi network. If your router has
the WPS function, you can select <Yes(WPS)> to proceed.
It will then start scanning the network. After the search is done, it will display a list of the available router.
Choose your router from the list, enter the WEP(Wired Equivalent Privacy) or WPA(Wi-Fi Protected Access) code. If your
network is not enabled with security code, the unit will connect to the router automatically.
7