Herunterladen Inhalt Inhalt Diese Seite drucken

Cleaning And Maintenance - miogo BTM2 Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

Check that the speed selector switch is in the "0" (off) position and that the appliance is
2.
disconnected.
Coded pins
Figure A
Assemble the accessories on the motor unit by first inserting the coded pins (Figure A)
3.
into the insertion openings (Figures B1 and B2) of the motor unit. If you use 2 accessories,
make sure they are identical.
Unwind the power cord out and insert the plug into a wall socket.
4.
Turn the speed controller to position 1 to start the appliance.
5.
Always start by mixing at low speed, then gradually increase
to the speed recommended in the recipe.
To use the "Turbo" function (maximum
6.
speed), hold down the button on the side.
CAUTION: the "Turbo" function cannot be used alone and should only be activated after first
selecting a speed.
18
Use
V.1.0
B1
B2
Figure B
Press here
Do not use the mixer for more than 1 minute under
the most extreme conditions (maximum power and
hard ingredients such as carrots, nuts, etc.). Take
a break of at least 30 minutes before using the
appliance again.
When you have finished, turn the speed controller to the "0" (off) position, then unplug the
7.
appliance.
To
remove
the
accessories,
hold
8.
accessories with one hand and press the
release button. If necessary, remove food
stuck to the accessories with a wooden or
plastic spatula.

Cleaning and maintenance

WARNING:
Before cleaning your mixer, disconnect it from the
power socket and wait until the motor unit has
cooled down sufficiently before storing it.
Never immerse the motor unit, power cord or plug
in water or any other liquid.
Wipe the body of the appliance with a soft, dry cloth. Make sure water never gets inside the
motor unit through the air vents.
Accessories can be washed in the dishwasher. You can also clean them with a soft sponge,
hot water and dishwashing liquid. Rinse them with clean water and then dry thoroughly with
a soft cloth.
Remove food residue on the power cord with a soft, slightly damp cloth.
Never use abrasive cleaning products or scouring pads for cleaning.
Press here
the
Cleaning and maintenance
19
V.1.0

Werbung

Inhaltsverzeichnis
loading

Verwandte Produkte für miogo BTM2

Inhaltsverzeichnis