Carat FASN8016-2 Betriebsanleitung Seite 33

Never use the body of the tool or top cap as a hammer, always use the tool for its
intended use. Do not discharge fasteners into concrete, stone, or any material too hard
for the nail to penetrate.
Do not drive fasteners close to the edge of the work surface. The workpiece may split
causing the nail to ricochet, fly free or hit someone.
Keep hands and body away from the discharge area of the tool
Keep face and body away from back of the tool cap when working in restricted areas.
Sudden recoil can result in hard impact to the body.
Never use tool in the presence of flammable dust, gases or fumes. The tool may
produce a spark that could ignite gases causing a fire and cause the tool to explode.
Be aware of material thickness when using the nailer.
NOTE :
A safety yoke is not required on fastener driving tools which accelerate the heaviest usable fasteners to
a free flight velocity V|
im
muscular tissue.
below the corresponding admissible 5,0 mm depth of penetration into human
33