Introduction; Warnings; Gearbox Identification; Long Term Storage - REDEX SRP-Serie Betriebsanleitung

1

INTRODUCTION

The SRP planetary gearbox will give you complete satisfaction if all of the following mounting, operating &
maintenance instructions are respected.
1.1

Warnings

1.2

Gearbox identification

Each unit can be identified through its identification plate and the serial number indicated on it. The serial
number must be given for any correspondence on a particular unit.
Serial number
Drawing code
Designation
1.3

Long term storage

Each gearbox is delivered wrapped and greased for 1 month anti-corrosion protection. Gearboxes which
are not installed shortly after receipt should be stored in a dry atmosphere with temperature between 0°C
& 40°C. The unit must be filled completely with oil for storage.
WARNING! HANDLING OPERATIONS.
The SRP unit can be handled by the main housing, the bevel box shafts, the fixing flange
holes or, with lifting rings by the output flange tapped holes.
WARNING! LUBRICATION REQUIREMENTS.
SRP units are delivered with oil and lubricated for a life time of 10000 hours.
Refer to lubrication chapter in this manual to respect all lubrication requirements.
Any damage due to an incorrect lubrication will void the warranty.
This document must not be reproduced nor information therein disclosed without our authorization
SRP User manual
861606
RX128656-12
SRP1.M.91.3.B5
Ref.: RX182/006
Version 01/2017 - English
Shipment date
NOV. 2016
Reduction ratio
91
Backlash (if
needed)
Page 2 / 28