Care And Cleaning; Cleaning The Grease Filter - AEG DIK8190HG Benutzerinformation

32 www.aeg.com
You can now activate the functions.
2. To activate the function touch the
symbol.
3. If needed, touch the light symbol
to illuminate the cooking surface. To
change the light intensity touch and
hold the symbol again.
To turn off the appliance press the
symbol again.
3.2 Hob to Hood function
It is an automatic function which
connects the hob with a hood. Both the
hob and the hood have an infrared signal
communicator. Speed of the fan is
defined automatically on basis of mode
setting and temperature of the hottest
cookware on the hob. You can also
operate the fan using the hob manually.
The function can be activated from panel
of the hob.
For more information how to
use the function refer to the
hob user manual.
3.3 Activating Maximum
Motor Speed
When you press the button
Maximum Motor Speed starts to operate
for 6 minutes. After that time, the
appliance returns to its previous speed
settings.
When the function is turned
on, additional touch on the
button
effects.

4. CARE AND CLEANING

4.1 Cleaning the grease filter

Each filter must be cleaned at least once
a month. Filters are mounted with the
use of clips and pins on the opposite
side.
To clean the filter:
1. Hold the panel on the sides and push
it back .
, the
does not have any
3.4 Activating and
deactivating the filter
notification
Filter alarm reminds to change or clean
the charcoal filter and clean the grease
filter. The filter indicator
(white) for 30 seconds if the grease filter
must be cleaned. The filter indicator
flashes (white) for 30 seconds if the
charcoal filter must be replaced or
cleaned.
Refer to filter alarm in care
and cleaning chapter.
1. Switch on the control panel.
2. Make sure that the icons are turned
off.
3. To activate or deactivate the charcoal
filter notification touch
seconds.
If the charcoal filter
notification is activated, the
filter icon
five times.
If the charcoal filter
notification is deactivated,
the filter icon
(white) three times.
1 1 1
2. Slightly tilt the front of the filter
downwards, then pull.
is turned on
for 3
flashes (white)
flashes
1 1 1
2 2 2