Cleaning And Maintenance - Wellue FG01 Bedienungsanleitung

1. Before starting massage, check that the massage
head is properly inserted for safe use of this product.
It is recommended to use this product step by step
from low gear.
2. Close the product, press and hold the product
handle, forcefully pull out the massage head, and
complete the disassembly.

9. Cleaning and Maintenance

1. Cleaning
Before cleaning, confirm that the power switch is

turned off, and that the power plug is removed from
the socket.
Wipe the surfaces of the product and control panel

with a soft cloth.
Dirty areas should be cleaned with a soft cloth

dipped in water or a neutral solvent before drying
with a dry cloth.
Caution
1. Do not unplug the power cord with wet hands.
2. Do not rinse the product with water or get water or
other liquids inside the product.
3. Do not use corrosive cleaners, such as benzene or
diluents to clean the product because it may cause
discoloration, corrosion, or cracking.
4. When the product is wet, do not disassemble the
product and allow the product to dry naturally.
12