ETT TD2176 Bedienungsanleitung Seite 3

OPERATING MANUAL:
radio-controlled solar worldtimer movement TD2176, transmitter DCF77 Mainflingen, Frankfurt am Main
Product Features:
•
Radio-controlled, automatic time setting and clock change for Daylight Savings.
•
Perpetual calendar
•
Reception Control
•
Worldwide manual time zone change possible – 38 digital worldtime zones
•
Solar movement with rechargeable battery. No changing of battery! Duration of battery when fully
charged is up to 6 months (without light).
•
Sleep function, outside of use and low charging status
•
LCD display with worldtime zone, worldtime, charging level, signal reception, day/date
•
Languages: German, English, Dutch, French.
•
Stop watch 1/100
•
Battery Status indicator
•
Battery Type: ML2016
General Information of Solar Technology
To avoid damage of the solar cells, the watch should always be charged to its
minimum. Therefore it is recommended to store the watch in the light and not in the
dark.
Initial Setup (important for correct setting of radio-controlled analog
1.
watch)
Due to heavy shocks or magnetic
from the internally saved radio time. the initial setup serves to resynchronize the
hands with the Internally saved radio time.
·Press and hold S2 for 8 seconds. The LCD will flash and „RST" will be displayed. Please hold S2 furthermore.
URGENT-DON'T STOP TO HOLD SET TILL THE DISPLAY SHOWS "RS"
·Please be patient until all hands stop running.
·press S2 stepwise to set all hands on 12:00. When all hands on 12h, Don't press any buttons and wait 1 minute, Watch will be automatically adjusted to
standard time. This procedure will take around 3-5 Minutes. Please do not press any button while hands calibration is in process.
(If the 3 Hands accidentally missed or was far away from 12 o'clock, You can Press and hold S2 for 8 seconds to re-start Fast rotation.
Press the S2 button before 3 hands approaches 12 o'clock, the hands will stop. Now go back to the third step above and continue.)
Checking Radio Reception
2.
The radio clock will attempt to receive the DCF77 radio-control signal every day between 2:00 and 3:00. However,
interference with reception might occur due to Thunderstorms or electrical disturbance.
You can check the radio reception status as following:
·
The LCD display shows Signal symbol when the reception attempt was successful.
Manual Radio Reception signal
3.
A manual call for the transmitter is always possible, but might fail due to bad weather conditions or electronic devices in the vicinity.
·Press S1 and hold for 3 seconds.
·The second hand rotates to 12:00, The LCD display shows the signal reception. The process will take 3-8 minutes.
Watch will be automatically adjusted to standard time.
Setting of LCD Display
4.
·
Press S1 to choose the desired option.
Language of index in LCD Display
5.
·
Press S1 (possibly several times) to go to date mode
·
Press and hold S3 once, the LCD display shows flashing language
·
Press S1 to choose/change.
·
Press S3 to store.
·
The day of week is now displayed in the chosen language.
Digital WorldTime zone setting + DST (DaylightSavingTime = Summertime)
6.
By adjusting the digital time zone, your watch can display the
Correct LCD time in other countries. The analog time will be unchanged.
·
Press S1 (possibly several times) to go to worldtime mode
·
Press S3 and hold for 3 seconds until the display shows flashing time zone.
·
Press S1 to choose/change.
·
DST: Press now S3 to activate „ON" or deactivate „OFF" the summer Time (DST) for digital world time.
·
Press SET to store.
Digital World Time (38 cities)
7.
fields, the hand position may differ
(The LCD Display can show date, world time zone, world time and stop watch)
(The display information is either in German, English, Dutch and French.)
Illumination
Table: loading time
luminous source
Sunshine 40 klx
Artificial light/LED 15 klx
Daylight/overcast 8 klx
1/2
Complete charging
16 h
24 h
60 h
TD2176 05/22