Technical Specifications - miniland eMyScale plus Bedienungsanleitung

5.4. IDENTIFYING AND SOLVING PROBLEMS
PROBLEM
Your mobile device is unable to
find eMyScale plus on taking a
reading.
The mobile device does not show
the weight when weighing
The weight reading displayed on
your mobile device is incorrect
The scales will not turn on
"EEE" message is showed on the
display
"Lo" message is showed on the
display
"Unst" message is showed on
the display
6. MAINTENANCE
6.1. CLEANING
• Clean the surface of the scales with a smooth cloth and natural cleaning products (when necessary).
• Do not use solvents or abrasive detergents.
• Never get the scale wet or immerse it in water.

7. TECHNICAL SPECIFICATIONS

- Units of weight: kg / oz / lb / g
- Maximum capacity: 20kg / 44lb / 705.48oz / 20000g
POSSIBLE CAUSES
Your scales are not turned on.
Your mobile device is not
compatible with Bluetooth BLE
4.1.
Your mobile Bluetooth is not
turned on.
The batteries in your scales are
flat.
eMyScale plus is out of the
Bluetooth range of your mobile
device
You have selected the manual
register option on eMyBaby
This may be due to interference
during the transmission of the
data
The battery level on your scales
is too low
The batteries in your scales are
flat.
The batteries have not been put
in place correctly
Maximum weight of 20kg / 44lb
/ 705.48oz / 20000g has been
exceeded
The battery level is low
The scale is on an unstable
surface
13
ENGLISH
SOLUTION
Turn them on by pressing the
"ON/OFF" button (f)
Check if your mobile device is
compatible with this Bluetooth
version
Check the Bluetooth on your
device is turned on.
Replace the batteries as
illustrated in item 5.1.1.
Place your mobile device closer
to the scales
Select the scales register option
Repeat the operation
Replace the batteries as
illustrated in item 5.1.1.
Replace the batteries as
illustrated in item 5.1.1.
Insert the batteries in accordance
with the instructions in item 5.1.1.
If possible remove part of the
weight from the scale
Replace the batteries as
illustrated in section 5.1.1.
Place the scale on a hard, stable
surface