Lupine C14 MAG Bedienungsanleitung Seite 9

Capacity indicator
After switching on, a status LED next to the button indicates the
capacity:
100 - 51% capacity = lights green
50 - 26% capacity = lights red
25 - 0% capacity = continuously blinks red
-> C14 Mag has to be charged
Light sensor:
When the light sensor is activated, the C14 MAG turns on or off
depending on the ambient light. The C14 MAG must be switched
on for this. When changing from darkness to brightness the sensor
controlled switch off takes place with a delay of approx. 20 sec.