Operating Instructions; Reading Hold; Relative Mode; Frequency/Duty Cycle Switch - Power Probe PPDCM80 Bedienungsanleitung

PPDCM80
Diode
Range
Temperature
Range
-20°C~1000°C
-4°F~1832°F
• Overload protection: 250V DC/AC RMS

4. Operating Instructions

4.1 Reading Hold

• To hold a reading on the display,press
on the display.
• Press to release the hold and return to normal display.

4.2 Relative Mode

• Relative Mode is only available for DC voltage, DC current, and capacitance
measurements.
• Press to enter relative mode; auto-range is disabled. The display will show
the value measured compared to the value when the button was pressed. Press
again to return to normal display.
Note:
When using relative mode, selct the appropriate range by pressing
activating relative mode.

4.3 Frequency/Duty Cycle Switch

• In AC current or AC voltage modes, press
in frequency mode to enter duty cycle mode. Press
to return to normal display. Pressing
position will switch between frequency and duty cycle.
Resolution
Shows approx. forward voltage drop
0.001V
of a diode.
Resolution
1°C
1°F
- 12 -
Accuracy
Accuracy
± (0,8 % de lecture + 3 digits)
and the current reading will be held
to enter frequency mode. Press
in duty cycle mode
while the rotary switch is in the "Hz"
EN
before