Bahco TASMB Serie Bedienungsanleitung Seite 13

STANDARD AND SLIM ELECTRONIC TORQUE-ANGLE BLUETOOTH ® WRENCH
®
AND ELECTRONIC TORQUE-ANGLE BLUETOOTH SCREWDRIVER
DELETING STORED TORQUE AND ANGLE DATA
1. From target torque or angle screen, press and hold ENTER button for 3 seconds.
2. Highlight CLEAR DATA menu selection using UP/DOWN buttons then press ENTER button to
display CLEAR ALL DATA screen.
3. In CLEAR ALL DATA screen, highlight YES menu selection to delete all stored data, or NO menu
selection to exit without deleting data.
4. Press ENTER button after making selection.
STD
M
SLIM
Note: If wrench is Locked (see Preset Lock in Advanced section), Clear Data function is disabled.
SCR
13