TIE TBT1 Benutzerhandbuch Seite 5

2. The pairing mode will last for 2 minutes.
3. Once turned on, the TBT1 will search and connect
automatically with the last paired device in working
range.
4. The TBT1 will automatically switch off if no device
can be connected within 5 minutes.
5. Clear the pairing list: Turn the TBT1 off, then press
and hold the MFB button for about 12 seconds
until the LED flashes red for 1 second and then
flashes in blue for 1 second. Afterwards, the
receiver enters into pairing mode automatically.
STREAM MUSIC
1. After successful pairing, connect the Bluetooth
receiver to a pair of 3.5mm stereo headphones or
a wired speaker using the included 3.5mm audio
cable. Now you can enjoy your favorite music from
your smartphone or other media players.
2. Press the MFB button once to pause or play the
music.
3. The LED keeps blue when music playing.
4. In standby mode, the LED flashes in blue once
every 1 second.
TRANSMITTER (TX MODE), SWITCH ON / OFF
Please turn the TX/RX switch to TX position before
getting started. TX or RX mode can no longer be
changed during operation.
4