Accessories - Hoover 48017642 Bedienungsanleitung

GETTING TO KNOW YOUR CLEANER
ASSEMBLING YOUR CLEANER
USING YOUR CLEANER
A. Dust Bin Assembly
B. Cleaner Main Body
C. On/Off Pedal
D. Park Slot
E. Dust Bin Release Button
F. Cord Reel Pedal
G. Dust Bin
H. Cyclone Body
I. Vortex Finder ( Metallic Red )
J. Dust Bin Lid
K. Dust Bin Flap Release Trigger
L. Dust Bin Lid Release Button
M. Hose
N. Hose Handle
O. Suction Regulator*
P. Accessory holder*
Remove all components from the packaging.
1. Connect the hose to the cleaner main body, ensuring it clips and locks into position. To
release: simply press the button on the hose end and pull. [1]
2. Connect the hose handle to the end of the extension tube upper [2a], or accessories
if required. [2b]
3. Connect the extension tube lower to the carpet or floor nozzle [3a] or accessories if
required. [3b]
4. The cleaning accessory tools can be stored after use on the underside of the extension
tube, using the accessory holder provided. [4]
1. Extract power cord and plug it into the power supply. Do not pull the cord beyond the
red marker. [5]
2. Adjust the telescopic tube to the desired height by moving the telescopic release button
up and raise or lower the handle to the most comfortable cleaning position. [6]
3. Carpet & Floor Nozzle. Press the floor type selector Pedal on the nozzle [7] to select the
Hard Floor – Brushes are lowered to protect the floor.
Carpet – Brushes are raised for the deepest clean.
4. Switch the cleaner on by pressing the on/off Pedal on the cleaner main body. [8 ]
5. Adjust the suction regulator on the handle to the desired level. [9]
6. Switch off at the end of use by pressing the on/off Pedal. Unplug and press the cord reel
pedal [F] to wind the power cord back into the cleaner.
ideal cleaning mode for the floor type.
*Certain Models Only ** Certain models only, nozzles may vary according to model
Q. Telescopic Tube
R. Carpet and Floor nozzle (GP)**
Q1. Carpet Nozzle (CA)**
Q2. Hard Floor Nozzle (HF)**
S. Floor Type Selector Pedal
T. Exhaust Filter
U. Pre-motor Filter
V1. Dusting Brush*
V2. Crevice Tool*
V3. Furniture nozzle*
W. Pet Hair Remover Mini Turbo Nozzle*
X. Allergen Remover Mini Turbo Nozzle*
All manuals and user guides at all-guides.com
Y. Grand Turbo Nozzle*
Z1. Parquet Nozzle*
Z2. Parquet Extra Nozzle*

ACCESSORIES

2
The tube can be parked on back of the cleaner for storage or temporary storage while in
use. [10]
To obtain the best performance and energy efficiency #1 it is recommended that the correct
nozzles are used for the main cleaning operations. These nozzles are indicated in the
diagrams by the letters GP, HF or CA.
A nozzle type GP can be used to clean both carpet and hard floor.
A nozzle type HF is suitable for use only on hard floor.
A nozzle of type CA is suitable for use only on carpet.
The other nozzles are accessories for specialist cleaning tasks and are recommended for
occasional use only.
by European Regulation (EU) 665/2013.
If the label shows a red prohibition circle on the left covering the carpet symbol, then this
indicates that the vacuum cleaner is not suitable use for on carpets.
#1 NOTE: Dust pick up ability carpet, dust pick up ability hard floor, and energy efficiency is
in accordance with Commission Regulations (EU) 665/2013 and (EU) 666/2013.
(except for dusting brush).
The Crevice Nozzle and Furniture nozzle are stored on the tube, while the Dusting brush is
stored underneath the hose handle.
• Crevice Nozzle * – For corners and hard to reach areas.
• Dusting Brush * – For bookshelves, frames, keyboards and other delicate areas.
• Furniture Nozzle * – For soft furnishings and fabrics.
• C&F Nozzle: For carpet and hard floors.
• Grand Turbo Nozzle* – Use the turbo nozzle for deep cleaning on carpets.
• Pet Hair Remover Mini Turbo Nozzle*– Use the mini turbo nozzle on stairs or for deep
cleaning on textile surfaces and other hard to clean areas.
• Allergen Remover Mini Turbo Nozzle* – Use the mini turbo nozzle on stairs or for deep
cleaning on textile surfaces and other hard to clean areas.
IMPORTANT: Do not use mini turbo nozzles on rugs with long fringes, animal hides and
carpet pile deeper than 15mm. Do not keep the nozzle stationary while the brush is rotating.
Parking and Storage Section
It is important to note that this vacuum cleaner is supplied with an Energy Label as required
If the label shows a red prohibition circle on the right covering the hard floor symbol, then
this indicates that the vacuum cleaner is not suitable for use on hard floors.
All accessories can be fitted to the end of the hose handle or to the end of the fixed tube
• Parquet Nozzle* – For parquet floors and other delicate floors.
GB