Herunterladen Diese Seite drucken

Tunze 6080.50 Gebrauchsanleitung Seite 18

Werbung

Attaching Comline components
Attach the inside part of the magnetic holder to the
upper section of the Comline. For this purpose,
place the magnetic holder on the Comline (1) and
push up until unit locks into place (2).
Attach the spacer suction cup to the Comline (3).
Place the Comline at the desired location in the
aquarium.
Hold the outside part of the magnetic holder at an
angle at a distance of 10 cm (3.93 in.), and carefully
attach. Subsequently turn slightly so that the two
magnets are parallel opposite each other (5).
In order to move the magnetic holder into another
position without damaging the elastic pads, the outside
magnet should be lifted slightly from the glass.
In case of heavy Comline components (9015, 3179,
3170, 6212), attach a second magnet instead of the
spacer suction cup.
Check for tight fit !
In order to remove the magnetic holder from the
Comline, the lock mechanism has to be pressed
together on both sides (6), and the magnetic holder
has to be pushed down.
All manuals and user guides at all-guides.com
Fixation de composants Comline
Fixez l'aimant interne du Magnet Holder sur la partie
haute de l'élément Comline. Pour cela, appliquez
l'aimant sur le Comline (1) puis poussez vers le haut
jusqu'au verrouillage des deux ergots (2).
Fixez la ventouse de maintien unique sur l'ergot
central en position basse du Comline (3).
Positionnez l'élément Comline à l'emplacement
choisi dans l'aquarium.
Positionnez l'aimant externe à 10cm de la vitre,
légèrement incliné (4), puis amenez-le délicatement
contre la vitre. Ajustez le support afin que les deux
parties soient parfaitement face à face (5).
Afin de déplacer Magnet Holder sans endommager
les tampons élastiques, il est important de soulager
l'aimant externe de la vitre.
Pour les éléments Comline lourds (9015, 3179,
3170, 6212), détachez la ventouse basse et insérez
un deuxième Magnet Holder.
Contrôlez la solidité de la fixation !
Pour séparer Magnet Holder de l'élément Comline,
libérez les deux verrouillages (6) puis poussez le
support vers le bas.


Werbung

loading

Diese Anleitung auch für:

6200.50