Whirlpool SW8 AM2 D XR 2 Kurzanleitung

Read the Instructions for Use carefully before
using the appliance.
2
3
1
4
5
15
6
7 X X
11
16
8
9
10
12
13
14
1. Control panel
2. Main LED 's lighting*
3. Fan
4. Optional lighting in Multi-flow*
5. Shelf divider*
6. Multi-flow cold air area*
7. Bottle rack *
8. Sensor cover
9. Rating plate with commercial name
10. Cooler compartment(best for meat and fish)*
11. Area shelves
12. Fruits and vegetables crisper
13. Crisper divider*
14. Door reversibility kit*
15. Egg tray*
16. Bottle separator*
17. Door trays
18. Door seal
* Available on selected models
HOW TO START THE APPLIANCE
After plugging the appliance to the mains, it starts the
operation automatically. After starting the appliance,
wait at least 4-6 hours before placing food into the
appliance. When the appliance is connected to the
power supply, the display lights up and all the icons
appear on the display for approximately 1 second.
The default (factory) values of the fridge compartment
settings light-up.
HOW TO REVERSE THE DOOR SWING
- see enclosed Instructions for Use (Version_1)
Is recommended to reverse door swing by two
persons. There is not foreseen door reversibility for:
- models with integrated handle
- models with glass panel on the door.
Specifications, technical data and images may
vary from model.
SMART DISPLAY
This optional function can be used to save energy. To activate /deactivate
the Smart Display, press and hold Fast Cool and Vacation
the same time for 3 seconds until an audible signal sounds. To temporary
reactivate the display, press any button. Remember that this function does not
disconnect the appliance from the power supply, but only reduce the power
consumed by external display (see the Instructions for Use).
Note: When the "6th Sense Fresh Control" is deactivated and the Smart
17
display will be activated: all LEDs on the display will turn off.
ON/STANDBY
To put the product in Stand-by, press and hold the button
All the icons turn off except On/Standby indicator
appliance press once (briefly) this button. (see the Instructions for Use)
18
TEMPERATURE DISPLAY
TEMPERATURE button
Press the temperature button to change the temperature:
the value changes cyclically between 8°C ad 2°C.
Note: Displayed set points correspond to the average
temperature throughout the whole refrigerator.
FAN
The Fan improves temperature distribution inside the product, allowing better
preservation of stored food. By default, the fan is switched on. To switch off
the FAN press and hold Fast Cool
and ON/STANDBY
same time for 3 seconds until an audible signal sounds and "6th Sense Fresh
Control" icon will turn off as confirmation that the fan has been switched
off. To switch on the FAN repeat the same procedure. As a confirmation
audible signal sounds and the icon turns on.
Note: Reasons why switch off the fan look for "ENERGY-SAVING TIPS" in the
Instructions for Use.
ALARM TYPE Signal
The acoustical alarm is activated. The Alarm Indicator
Door open alarm
Open Alarm indicator
(even if other alarms have been reset)
Malfunction. The letter "F" blinks on the display (°C).
GB DE FR IT PT DA FI NO
QUICK START GUIDE
buttons at
for 3 seconds.
. To reactivate the
6TH SENSE FRESH CONTROL
This function automatically works to ensure the optimal conditions to
preserve the stored food. To deactivate the "6th Sense Fresh Control", press
buttons at the
and hold Fast Cool and ON/STANDBY
for 3 seconds until an audible signal sounds and "6th Sense Fresh Control"
icon turns off as confirmation that the feature has been deactivated. To
reactivate this function repeat the same procedure.
Note: Deactivation of the function switch-off the FAN in the fridge.
ALARMS TABLE
Cause
blinks and the Door
The door has remained open for more than 2 minutes.
still visible until the door is closed
Product malfunction.
SV UK AR
FAST COOL button
Using Fast Cool function it is possible to increase the cooling capacity in the
refrigerator compartment. The use of this function is recommended when
placing a very high quantity of food in the refrigerator compartment. Press the
Fast Cool button to activate Fast Cool function. When activated, the Fast
Cool indicator turns on. The function is automatically disabled after 6 hours, or
can be manually disabled by pressing Fast Cool button
DOOR OPEN ALARM indicator
(see the below alarms table)
ALARM indicator
(see the below Alarms Table)
STOP ALARM button
Press in case of alarm to mute the acoustic alarm.
VACATION button
This function can be activated to reduce the energy consumption of
the appliance during a prolonged period of time.
Before activating the feature, all perishable food should be removed
from the refrigeration compartment and make sure that the door
is closed properly, since the refrigerator will maintain a suitable
temperature to prevent the formation of unpleasant odors (+12°C). To
activate/ deactivate press the Vacation mode button for 3 seconds.
When the function is enabled, the related symbol will light up and the
temperature of the refrigerator compartment will be set to a higher
setpoint (the temperature display will show the new temperature
setpoint of +12°C). Changing the temperature setpoint will
automatically deactivate the function.
buttons at the same time
Cure
Close the door or press the Stop Alarm to mute the acoustical alarm.
Contact the After-sales Service.
EN
again.
400005221602