Installation; Built-In Hobs - AEG IEB64000XB Benutzerinformation

3. INSTALLATION

WARNING!
Refer to Safety chapters.
3.1 Hob and oven connection type
This appliance has a yellow 1x14 pole
connector and can be connected to an oven
with a yellow 1x14 pole connector.
3.2 Before the installation
Before you install the hob, write down the
information below from the rating plate. The
rating plate is on the bottom of the hob.
Serial number ...........................

3.3 Built-in hobs

First install the oven then the hob in its
cutout.
Only use the built-in hobs after you assemble
the hob into correct built-in units and work
surfaces that align to the standards.
3.4 Assembly
If you install the hob under a hood, please
see the installation instructions of the hood
for the minimum distance between the
appliances.
min.
500mm
44 ENGLISH
min.
50mm
576
+1
490
min. 55
Find the video tutorial "How to install your
AEG Induction Hob - Worktop installation" by
typing out the full name indicated in the
graphic below.
How to install your AEG
Induction Hob - Worktop installation
516
46
+1
560
max. R5
min. 28
www.youtube.com/electrolux
www.youtube.com/aeg