Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
• Safety regulations
• Guarantee and service conditions
FOR USE
Installation as a leaf blower (fig. A + B1 - B4)
1. Slide the blow tube (4) onto the exhaust opening
of the motor housing until it clicks into place.
Assembly as leaf vacuum (fig. A + C - F)
1. Take the axle from the wheel set (fig. C2)
2. Slide the wheel set over the guide at the bottom
of the suction tube (6) (fig. C3).
3. Insert the axle through the wheel set and the
guide (fig. C4).
4. Connect the 2 parts of the suction tube with the
screws supplied (fig. D1 + D2).
5. Slide the suction opening shut-off valve lock knob
(5) forward and hold the lid up (fig. E1).
6. Place the suction tube on the suction opening
(fig. E2).
7. Slide the locking button forwards and push the
suction tube into the suction opening (fig. E3).
8. Release the lock button to lock the suction tube
(fig. E4).
9. Hook the collection bag (8) onto the suction tube
and slide the cuff over the outflow opening until it
clicks into place (fig. F2).
Inserting the batteries
Make sure both batteries are fully
charged.
• Slide the batteries over the charging contacts in
the battery holder until they lock.
Removing the batteries
• Press the locking button on the battery and pull
the battery out of the holder.
USE
When used as a leaf blower, the suction
opening cover must be closed and
locked.
When used as a leaf vacuum cleaner, the
collection bag must be mounted and the
bag zipped up.
Switching on and off (fig. A)
• Slide the on/off switch (2) to the ON position to
switch on the machine.
• Slide the power switch to the OFF position to turn
the machine off.
Adjusting the speed (fig. A)
The blowing and suction speed can be adjusted with
the speed controller (1).
CLEANING AND MAINTENANCE
Remove the batteries from the device
before cleaning or performing
maintenance.
Cleaning
• Keep the ventilation slots free from dust and dirt
to prevent overheating.
• Clean the housing with a soft damp cloth after
each use.
Never use solvents such as gasoline or
alcohol. These can damage the plastic
parts.
Maintenance
The device does not require any special maintenance.
TECHNICAL DATA
No load speed
Rated voltage
Motor
Max. blow/suction force
Content collection bag
Mulching ratio
Weight
L
(sound pressure)*
pA
L
(acoustic power)**
WA
Vibration emission a***
Uncertainty
*L
pA
**L
WA
*** K
Take measures for hearing protection.
ENGLISH
min
8.,00-14,000
-1
V=
40
type
887
m
/h
220
3
l
35
9:1
kg
2.6
dB(A)
97
dB(A)
106
m/s
<8
2
K
1.2 dB(A)
K
1.0 dB(A)
m/s
1.5
2
11
Werbung
Inhaltsverzeichnis
