Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Removing the battery
• Press the release button on the battery and slide
the battery out of the battery holder.
Placing the blower tube (fig. A)
Remove the battery before inserting the
blower tube.
• Slide the blow tube (4) onto the blow-out opening
until it locks.
Removing the blower tube (fig. A)
Remove the battery before removing the
blower tube.
• Hold down the release button (3) and pull the
blower tube off the device.
USE
Switching on and off (fig. A
• Slide the battery into the battery holder until it
clicks into place.
• Slide the on/off switch (2) to the ON position to
switch on the device.
• Slide the power switch to the OFF position to turn
off the device.
The device continues to blow for a few
seconds after it has been switched off.
Allow the motor to come to a complete
stop before restarting the unit. Do not
turn the device on and off in rapid
succession.
Blowing
• Hold the blower with one hand and slowly move
the blower from side to side.
Never aim the blower at large objects,
vehicles or buildings.
CLEANING AND MAINTENANCE
Remove the battery from the device
before cleaning or performing
maintenance.
Cleaning
• Keep the ventilation slots free from dust and dirt
to prevent overheating.
• Clean the housing with a soft damp cloth after
each use.
Never use solvents such as gasoline or
alcohol. These can damage the plastic
parts.
Maintenance
The device does not require any special maintenance.
TECHNICAL DATA
No load speed
Rated voltage
Motor
Max. air speed
Weight
L
(sound pressure)*
pA
L
(acoustic power)**
WA
Vibration emission a***
Uncertainty
*L
pA
**L
WA
*** K
Take measures for hearing protection.
GUARANTEE
Refer to the enclosed guarantee
conditions for the terms and conditions of
guarantee.
ENGLISH
min
12.000
-1
V=
20
type
785
km/h
190
kg
1.2
dB(A)
81.2
dB(A)
90.4
m/s
2.142
2
K
3 dB(A)
K
3 dB(A)
m/s
1.5
2
9
Werbung
Inhaltsverzeichnis
