SL mono Bedienungsanleitung Seite 9

Assembly instructions
Attachement to the handlebar:
Position the SL Mono centric at
the handlebar. Now close the
bracket of the quickrelease.
For a centric montage at 50mm stems: Art. No.: 5355
Adjustment of the lamp:
Height of the light cone after
5m: Half height as outlet
Height for mounting: 400-1200mm
For proper setup screw on
the lever of the quick- re-
lease mount.
1/2
5m:
Turn on: With a quick double click you can switch on the lamp.
Switching: With a single click you can switch through the dim
levels. (Factory setting: 1. Daytime running light, 2. dimmed
low beam, 3. low beam)
Turn off: Durch einen langen Tastendruck schaltet sich die
Lampe aus.
Programming: Keep the button pressed until the lamp lights
up as many times you'll need it to, let go to select. Note: It will
take about 6 sec. until the programming starts.
Keep button pressed
Settings
until the lamp ...
Light sensor on /off (default)
lights up 1x
Double click on (default) / off
lights up 2x
Battery warning early / late (default)
lights up 3x
lights up 4x Reset to factory settings
(Factory setting: 1.5W, 4W, 8W)
Operation