Device Operation - tiko Energy Solutions M-Box NG4E Benutzerhandbuch

M-Box NG4E User's Manual

Device Operation

The operation of the M-Box is designed for unattended use and requires no interaction.
By pushing the button (marked as no. 1 in IMAGE 5) down while connecting the M-Box
to power, a firmware update is triggered.
PLC Quality
Several factors can have an impact on the quality of the communication through the
power lines between the M-Box and the other tiko devices. It is advised to ensure the
following points:
•
Plug the M-Box directly into a wall socket, not into a power strip (IMAGE 8).
•
Do not plug in the M-Box near sources of disturbances like: Power supplies (e.g.,
from routers, TV box or LED lamps) and transformers (e.g., for dimmable lamps).
•
Consider filtering the disturbance sources mentioned above using a PLC Filter,
e.g., myStrom Power Line Filter (REF PQFIL1-EU, PQFIL1-FR). A such example
setup is shown in IMAGE 9.
LED Explanation
The LED is marked as no. 2 in IMAGE 5. It can be interpreted according to the following
table:
Color
Green
Orange
Red
Yellow
Step 1 Remove the device from the socket.
Step 2 If the device remains property of tiko Energy Solutions AG or
its authorized reseller, it must be returned. Otherwise, the
ultimate disposal of a device shall be handled according to
national laws and regulations.
tiko Energy Solutions AG
Operation
Description
Operational
all PLC/radio devices reachable
Not all PLC/radio devices reacha-
ble
No PLC/radio devices reachable
Blinking: Device is running firmware upgrade,
Uninstalling
English
Blinking:
additionally, no connection
to back-end
IM-0007-0010 Rev. 4
5 / 36