Package Content - tiko Energy Solutions M-Box NG4E Benutzerhandbuch

M-Box NG4E User's Manual

Package Content

Open the package and check that you have all of the following items:
•
Instruction manual
•
M-Box (IMAGE 1)
•
Power cord (IMAGE 2)
Depending on the kit, the following optional items are included in addition:
•
K01-GM-01.0013E-C-ETH-PSF2
o
o
o
•
K02-GM-01.0013E-C-ETH
o
o
If any of the parts are incorrect, missing, or damaged, please contact the retailer where
you made your purchase. Keep the carton box, including the original packing materials, in
case you need to return the unit for repair.
Device
IMAGE 1 shows the device. IMAGE 2 shows various power cords for different countries.
Please note that your country's power cord might not be shown here.
On the rear side of the device a label is indicating
•
The manufacturer
•
The device model number (REF) and the current rating
•
The hardware (HW) and firmware (FW) version
•
The unique serial/MAC address as text and as Aztec 2D code (SN/MAC)
Installing the M-Box
Step 1 Connect the power cord to the M-Box (IMAGE 7) and engage the plug
in a free socket. Please see also section PLC Quality.
Step 2 Connect the LAN cable to your router (IMAGE 6).
Step 3 To finalize the installation, all tiko devices must be configured using the
installation app.
tiko Energy Solutions AG
Power Cord Type J (1
Small power strip with 2 Type F sockets (IMAGE 3)
5m Ethernet cable (IMAGE 4)
Power Cord Type J (1
5m Ethernet cable (IMAGE 4)
English
st from left in IMAGE 2)
st
from left in IMAGE 2)
Installation
4 / 36
IM-0007-0010 Rev. 4