Technical Drawing - Bernstein G3005A Montage- Und Bedienungsanleitung

TECHNICAL DRAWING

Top edge
Finished floor
To place the expansion anchors, drill holes in the wall and floor.
Theoretical dimension of
the wall brackets for the
outer mounting variant.
A
Theoretical dimension of
the wall brackets for the
inner mounting variant.
a
4
WC-SUPPORT FRAME G3005A
529 mm
500 mm
460 mm
230 mm
180 mm
H1
Ø110 mm
375 mm
The dimensions of H1 and H2 are variable and depend on the WC.

A
Drill holes Ø10x75 mm ►Insert expansion anchors ►Fasten the brackets
Top edge
Finished floor
(a) Dimension according to the actual orientation of the flush pipe.
B
Note: The above holes are theoretical dimensions for frame mounting.
Please refer to the actual position of your frame.
Water connection with lateral arrangement
The cistern is connected to the water supply
via the angle valve.
Mounting wall
165 ~ 200 mm
H2

A
ø10x75 mm
The wall brackets A can be
mounted inside or outside.
The drilling distance is different.

B
ø10x75 mm
Thread of the angle valve: G ½"
Support Frame
+20
400
-10
A


B