Manual Scan; Audio Mode; Start/Pause/Stop Playback - Audizio ARLES Micro HiFi System Bedienungsanleitung

AUDIO BIT RATE
The display will show the digital audio bit rate being received.
TIME / DATE
This displays the current time and date provided automatically by the broadcaster.
DLS (DYNAMIC LABEL SEGMENT)
Dynamic label segment is a scrolling message that the broadcaster may include with their transmissions. The message usually
includes information, such as program details.
To switch the unit to FM mode, press the SOURCE button.
AUTO SCAN
Press SCAN/ until the tuner starts searching for a station. To scan down the frequency band, press and hold the SCAN/
button. Once a station has been found, the scanning will stop automatically.

MANUAL SCAN

To search for FM stations manually, press
SCAN SETTING
This is a setting to choose between letting the radio scan for all stations, or just for stations with a strong signal.
1. Press the MENU button, then press
2. Press the or buttons to select "All stations" or "Strong stations only". Press the ENTER button to confirm setting
choice.
AUDIO SETTING
This unit will automatically switch between stereo and mono mode, but you can override this and choose manually.
This can be helpful when having poor signal reception.
1. Press the MENU button, then press the
2. Press the or buttons to select "Stereo allowed" or "Forced mono" and then press ENTER to confirm.

AUDIO MODE

Press MONO/STEREO on the remote control to toggle between the stereo or mono modes.
PRESET STATIONS
You can store up to 30 of your favorite stations. This will enable you to access your favorite stations more quickly and easily.
1. To store a preset, you must be listening to the station that you want to save. Press and hold MEMORY. The display will
show "Preset Store < 1:(Empty)>".
2. Press the or buttons to select your desired preset station number and press the ENTER button to confirm.
3. The station will be stored, the display will show "Preset #Stored".
RECALLING A STORED STATION
1. Once you have saved a station to one of the preset buttons, you can recall it by pressing the MEMORY button.
2. Press or until your desired stations show on the display, then press ENTER confirm.
Press the INFO button, the display will change between multiple display modes. The information of each display mode is
displayed on the lower segment of the display.
RADIO TEXT
As with DAB, the broadcaster can include a scrolling text that displays information about the current program.
PROGRAM TYPE
This describes the "style" or "genre" of the program that is being broadcasted.
FREQUENCY
Displays the frequency of the present station.
AUDIO TYPE
This displays if the station is in mono or stereo.
TIME / DATE
The broadcaster provides clock and date information automatically, so there's no need to manually set this information.
Press the SOURCE button repeatedly on the unit or on the remote control to select CD mode.
1. Place an audio CD on the center spindle with its label side facing out/up towards the CD compartment door. Close the disc
compartment.
2. Unit starts to read the disc, "CD READING" shows on the display. After a few seconds, the total number of tracks and the
total time of the CD will be shown on the LCD DISPLAY for one second.
3. The first track of the CD/MP3 disc will start playing automatically.
If there is no disc inserted or the disc can't be read, "NO CD" will be shown on the display.
CONNECTING USB DEVICES
USB memory sticks can be inserted into the USB port, which enables music tracks to be played from a USB memory stick.

START/PAUSE/STOP PLAYBACK

Press the button in the CD/USB section of the remote control or press
Use the button in the CD/USB section of the remote control or
or repeatedly until your desired frequency is reached.
or to select "Scan setting". Press the ENTER button to confirm menu choice.
or buttons to select "Audio setting". Press ENTER to confirm.
8
on the main unit to start/pause playback.
on the device to completely stop playback.