Waldbeck Clearflow 6UVL Bedienungsanleitung Seite 18

EN
18
Water leading
Parts
• Finally, take the supplied pipes for the aquarium assembly (top illustration)
and plug them together as shown in the illustration on the right.
• First install the connection marked "To Aquarium". Give the water hose
a good suck and then plug the "To the filter" connection together before
switching on the pump, so that it does not run dry.
• The filter and pump must be lower than the water level in the aquarium.
For setup, please nevertheless briefly take it to about the same height so
that the motor is not overstressed.
Water leading parts
Hoses