Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
(10)
The nameplate is situated inside the appliance or at the
back.
3.2 Installation
Depending on delivery, there are 2 different ways of
installation. Carry out the installation relevant to your
mounting-accessories (either A or B).
The dimensions of the appliance are registered in chap. -
Technical data-.
WARNING!
Switch off and unplug the appliance before
installation. RISK OF ELECTRIC SHOCK!
CAUTION!
The installation must be carried out by at least two
persons; otherwise you may hurt yourself or damage
the appliance. Do not tilt the appliance more than 45
Installation A:
(1) Push the appliance carefully into the cabinet. Check that the
appliance stands safely and properly adjusted in the
cabinet.
(2) Fix the appliance with the 4 woodscrews on the fixing-
points described below.
Fixing points to fix the appliance with the
assembled components A+B and the supplied
woodscrews in the cabinet.
(3) Level the distance between cabinet and appliance with
the supplied plastic profile-seal.
0
.
42
Plastic profile seal
Werbung
Inhaltsverzeichnis
