Safety Instructions - auna PRO TMX-2211 MKII Bedienungsanleitung

Dear Customer,
Congratulations on purchasing this device. Please read the following
instructions carefully and follow them to prevent possible damages. We
assume no liability for damage caused by disregard of the instructions and
improper use. Scan the QR code to get access to the latest user manual and
more product information.

SAFETY INSTRUCTIONS

Magnetic fi eld
Caution! Do not locate sensitive high-gain equipment such as
preamplifi ers or tape decks directly above or below the unit.
Because this amplifi er has a high power, it has a strong magnetic
fi eld which can induce hum into unshielded devices that are located
nearby. The fi eld is strongest just avoe and below the unit. Locate
the amplifi er in the bottom of th rack and the preamplifi er or other
sensitive equipment at the top.
Warning: Risk of electric shock
Do not open!
To prevent electric shock do not remove top or bottom
covers. No user serviceable parts inside. Refer servicing
to qualifi ed servicing personnel. Disconnect power
cord before removing back panel cover to access gain
switch.
Do not expose this equipment to rain or moisture!
SPECIFICATIONS
INPUT:
DJ Mic ...................................... 1,5 mV / 2 kΩ
Phono ....................................... 3 mV / 47 kΩ
Line ...................................... 150 mV / 27 kΩ
OUTPUR:
Main ..................................... 0 dB / 1 V 600Ω
GENERAL:
Frequency response .......... 20Hz~20 KHz ±2 dB
Distortion ........................................ <0,02 %
S/N ratio ............................... besser als 80 dB
Headphone impedance .......................... 160 Ω
Power source ...................... DC 24 V / 250 mA
EN
9