Operation (weighing)
1. P ut the scale on suitable flat surface (see I. SAFETY PRECAUTIONS).
2. P ut the bowl (if you use one) on the scale before switching it on. Do not put things you
want to weight on the plate before you turn the appliance on!
3. P ress the
button to turn on the scale (the display will show all symbols for about
2 seconds).
4. W hen the display shows 0, the appliance is ready for weighing.
5. P ressing the MODE button, choose a mode in which you want to operate (WEIGHT -
WATER VOLUME - MILK VOLUME). If you want to change weighing mode (g - lb:oz;
ml - fl´oz), press UNIT.
6. P lace the weighed item in the bowl and wait for the value on the display to stabilize.
7. A fter weighing, you may turn off the scale by pressing the
turn off automatically after 120 seconds.
Operation (measuring volume)
1. P ut the scale on suitable flat surface (see I. SAFETY PRECAUTIONS).
2. P ress the
button to turn on the scale (the display will show all symbols for about
2 seconds).
3. W hen the display shows 0 g, the scale is ready for measuring.
4. P ressing the MODE button, choose a mode in which you want to operate (WEIGHT -
WATER VOLUME - MILK VOLUME). If you want to change the units mode (g - lb:oz: ml
- fl´oz), press the UNIT button.
5. P lace the container for liquids in the middle of the weighing surface. Its weight will show.
Then press
, which will reset the reading (the display will show 0).
6. P our the liquid into the prepared container and wait until the value on the display
stabilizes.
7. A fter weighing, you may turn off the scale by pressing the button or the scale will turn
off automatically after 120 seconds.
insert the weighed subject
insert the
container
pour the liquid
27
/ 46
button or the scale will
GB