Spypoint LINK-MICRO-LTE Anleitung Seite 7

CONFIGURING YOUR CAMERA
Both the SPYPOINT app and website let you configure all the camera settings remotely.
They also provide basic information on your camera – such as: cellular signal
strength, battery level, and MicroSD card space used. This information is based
upon the latest connection with your camera.
New settings take effect every time the camera connects with the SPYPOINT app or
website. Below are the most basic settings you will configure.
BASIC PHOTO SETTINGS
Delay: Allows you to set the time interval between each detection before the
camera takes the next photo.
Multishot: Allows you to set the number of photos per detection (up to 2) with a
5-second delay between each photo.
Sensitivity: Allows you to set the detection sensitivity of the camera.
Camera name: Allows you to name each owned camera with a 30-character limit.
CELLULAR SETUP
First transfer time: Allows you to choose the time when the camera makes its
first transfer of the day.
Transfer frequency: Allows you to choose the number of daily transfers.
ADVANCED OPTIONS/CONFIGURATION
Schedule: Allows you to set the period of operation for each day of the week.
For a 24-hour operation mode, both the start and stop times must be 12 AM.
NOTE:
Camera transfers are set by default to every 4 hours from midnight.
For a complete list of specifications, features,
and settings, visit our LINK-MICRO-LTE page at
www.spypoint.com.
7