Herunterladen Inhalt Inhalt Diese Seite drucken

RONDELL RDE-1151 Die Betriebsanweisung Seite 4

Inhaltsverzeichnis
Verfügbare Sprachen

Verfügbare Sprachen

ENGLISH
COFFEE GRINDER RDE-1151
Coffee grinder allows to control the coffee grinding
degree for different ways of coffee making. The finer the
grinding, the quicker the coffee is prepared, but the taste
of ready drink may be bitter and harsh. And vice versa: if
coffee grade is too coarse, the ready drink will taste weak
and washy. With proper grinding degree the ready coffee
is strong but has no bitter aftertaste.
DESCRIPTION
1. Ground coffee container
2. Container lid
3. Container lock
4. Ground coffee scale
5. Ground coffee amount control knob
6. Coffee grinder on button «
7. Coffee bean container lid
8. Coffee bean container
9. Detachable upper millstone
10. Cord storage
11. Grinding degree control knob
12. Body
SAFETY MEASURES
Before using the coffee grinder, read these instructions
carefully. Keep this instruction for further reference.
Use the unit for intended purposes only, as specified in
this manual. Mishandling the unit can lead to its break-
age and cause harm to the user or damage to his/her
property.
Before plugging the unit in, make sure that your home
mains voltage corresponds to the voltage specified
on unit body.
Do not use the unit outdoors.
Use only the accessories supplied with the unit.
Before using the coffee grinder for the first time wash
all the removable parts thoroughly.
Before using the unit make sure that all the parts are
set properly.
The coffee grinder is intended only for grinding cof-
fee beans.
Do not switch the unit on, if the container is empty.
The maximal continuous operation time is 1 grind-
ing cycle; make at least 3-5 minute breaks between
grinding cycles.
If rotation of the millstone is hindered, unplug the unit
and remove the obstruction that hinders millstone
rotation.
Set the grinding degree before switching the coffee
grinder on.
Remove the ground coffee container and open the
lid of the coffee bean container only after the unit is
switched off and millstone rotation stops completely.
Never leave the operating unit unattended.
Always unplug the unit before cleaning or if you are
not using it.
Do not use the unit near hot surfaces (for instance, gas
or electric stove, oven).
Provide that the power cord does not touch sharp
edges of furniture and hot surfaces.
Do not touch the power plug with wet hands.
To avoid risk of electric shock and fire, do not immerse
the unit, the power cord and the power plug of the unit
into water or any other liquids.
»
If the unit is dropped into water:
Do not allow children to touch the coffee grinder body
and the power cord during the unit operation.
This unit is not intended for usage by children.
Do not leave children unattended to avoid them using
the unit as a toy.
During the unit operation and breaks between oper-
ation cycles, place the unit out of reach of children.
The unit is not intended to be used by people with
physical, sensory or mental disabilities (including chil-
dren) or by persons lacking experience or knowledge
if they are not under supervision of a person who is
responsible for their safety or if they are not instructed
by this person on the usage of the unit.
For children safety reasons do not leave polyethylene
bags used as a packaging unattended.
Attention! Do not allow children to play with polyethylene
bags or packaging film. Danger of suffocation!
Check the power cord and plug periodically. Do not
use the coffee grinder if the unit, the power plug or the
power cord is damaged.
If the power cord is damaged, it should be replaced
by the manufacturer, a maintenance service or similar
qualified personnel to avoid danger.
Do not attempt to repair the unit. Do not disassemble
the unit by yourself, if any malfunction is detected or
after it was dropped, unplug the unit and apply to any
authorized service center from the contact address
4
– do not touch the water;
– unplug the unit immediately, and only then take it
out of water;
– apply to the authorized service center for testing or
repairing the unit.
Inhaltsverzeichnis
loading

Inhaltsverzeichnis