Werbung
Verfügbare Sprachen
Verfügbare Sprachen
16090
Headphone holder
with table clamp
- protective and stable headphone holder
-
(rubber covered steel core)
- for up to 2 standard headphones plus
-
2 in-ear headphones
- can be attached to tables
- the clamp is easy on the surface
- clamp area of 0-45 mm
Thank you for choosing this product. This instruction manual informs
you about the important steps to set up and handle the product. We
recommend to keep the manual in a separate place for a possible later
use.
SAFETY NOTES
- Weight bearing load: up to 2 headphones plus 2 in-ear-
-
headsets
- The clamp is designed to be attached to tables.
- The clamp is not designed to be attached to tubes.
- Only use with suitable tables that based on their charac-
-
teristics and stability are able to carry additional load.
- The flexibility of the individual components can result in
-
wedging risk. Careful handling during setup, operation,
-
disassembly is indispensable.
- Ensure the clamp screw is tight
ASSEMBLY INSTRUCTION
The product is ready for use and does not require
preparatory steps.
ATTACHING the CLAMP
1 DiThe table thickness may not exceed 45 mm.
2 Loosen the clamp screw as much as required.
3 Place the clamp on the table snuggly and re-tighten
3
the clamp screw
FUNCTIONS
4 Form and material of the handle provide maximum
4
protection of the headphone(s)
5 Two slits on the handle securely hold the in-ear
5
headsets
CHECK, MAINTENANCE, CLEANING
- in the event of workstation maintenance pay attention
-
to possible risks (wedging)
- to care for the product use a damp cloth and a non-
-
abrasive cleaning agent.
KÖNIG & MEYER GmbH & Co. KG
Kiesweg 2, 97877 Wertheim, www.k-m.de
16090-000-55 Rev.02 03-80-303-00 8/13
All manuals and user guides at all-guides.com
ATTACHMENT & DIMENSIONS
FUNCTIONS
TECHNICAL DATA / SPECIFICATIONS
Material
Load
Dimensions
Packaging
Weight
Plate:
max. 45
Holding angle, clamp: steel, black
Clamp handle, cap: PA, rubber molding part, black
Holder cushioning: TPE, black
up to 2 headphones plus 2 in-ear-headsets
Headphone holders: inside 96 x 60 mm
U-Clamp depth: 43 mm, Width 30 mm
Clamping area: table: 0 - 45 mm
PE-bag 175 x 370 mm
0.205 kg
Werbung
