Installation Requirements - FS AP-N303 Schnellstartanleitung

FAT AP
State
Off
Blinking Green
Solid Green
Blinking Red
Solid Blue
Blinking Blue
NOTE: Hz indicates the number of times a flashing light blinks per second.

Installation Requirements

Install AP indoors. Do not power AP on during installation.
Ensure that the floor of the installation site is dry and flat.
Ensure that the installation position is secure enough.
Ensure that AP avoid liquid intrusion.
Ensure that the space around the installation position is enough to facilitate heat dissipation.
Install AP in a well-ventilated position.
The working environment temperature of AP is maintained at -10°C to 50°C, and the
relative humidity is maintained at 5% to 95%.
Keep AP clean and dust-free.
Keep AP away from high voltage cables.
4
Frequency Description
AP is not connected to the power supply,
or AP is in DND state, which can be closed
N/A
by software.
Uboot program initialization in progress.
3Hz
N/A Main program initialization in progress.
Initialization is complete, but the Ethernet
3Hz
link is down.
AP is working normally. No wireless client
N/A
is associated with AP.
AP is working normally. At least one wireless
3Hz
client is associated with AP.