Maintenance And Cleaning - Zelmer ZPU5500 Benutzerhandbuch

PL EN
Button operation:
Power button (a)
Touch the power button to turn on the machine, the buzzer will ring for one time, the power indicator and the
low grade of wind speed indicator light blue.
Touch the button again, the button again, the buzzer will ring for one time and the machine will turn off with
all the lights off.
Note:
- The machine will record the wind speed and anion function when turns off without unplugging the power
socket.
- The lamp always on and the timer always off when push the power button and open the appliance.
Timer button (b)
In the condition of working, press the timer button to set among the circulation of 2h, 4h and 8h timer with
buzzer rings, and the corresponding indicator will be on.
Press again, the timer indicator turns off and the machine will work continuously without timer.
In the status of timing, the machine begins of count down. When the time is up, the fan will stop working and
all the lights will be off.
Wind Speed button (c)
In the condition of working, press the wind speed button, the buzzer will ring for one time when the machine
is on.
L: low wind speed
H: high wind speed
Auto: auto wind speed. The appliance will work according to the air quality of the room.
Press again to adjust the wind speed among the circulation of low, middle , auto grade with buzzer rings, the
corresponding indicator will be on, when the machine is on.
Light control (d)
When press light button (d) one time, the light is on.
When press light button (d) button for the second time, the light is off.
When press light button (d) for 3rd time, the light gets stronger.
Anion function (e)
Press anion button (e) again, the Anion function will be off and the Anion lamp is off when the machine is on.
Press anion button (e) one time, the Anion function is on and the Anion lamp is on when the machine is on.
Dust Sensor
The brightness of the lighting will change as per as the air quality in the room
- Blue represents good air quality
- Orange represents fair air quality
- Red represents poor air quality.
REMINIDER OF REPLACING FILTER
When the machine detects the filter is saturated, the power indicator will keep flashing.
Please press the power button for 7 seconds to reset after installing a new filter.

MAINTENANCE AND CLEANING

Ensure the item is power off and unplugged before starting any cleaning tasks.
Do not immerse the machine into water or any other liquid.
Do not use abrasive, corrosive or flammable cleansers (such as bleach or alcohol) to clean any part of the
unit.
10