Herunterladen Diese Seite drucken

Technical Data - Conrad 2379911 Bedienungsanleitung

Kabelloser haartrockner, massagepistole und taschenlampe

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Note:
After 15 minutes of uninterrupted use, the motor switches off automatically. Restart the motor if
needed.
CAUTION
Hot air heats up nozzle and diffuser.
Touching might lead to burns.
● Let nozzle and diffuser cool down before touching.
1. Attach the hair dryer attachment to the power unit.
2. (If required) attach the nozzle or diffuser to the hair dryer attachment.
3. Press the on/off button to switch on.
à
The battery indicator is lit GREEN if the power unit has sufficient power.
à
The battery indicator flashes RED if the power unit is discharged. Charge it.
4. Repeatedly press the gear button to select temperature settings. The colours of the power indicator
indicate temperature settings. Select a temperature in the following sequence: cold (GREEN) →
warm (ORANGE) → hot (RED).
5. After use, press the on/off button to switch off.
12 Troubleshooting
Problem
Possible cause
Power unit switches off. Power
Overtemperature protection is
unit cannot be restarted.
activated.
13 Cleaning
Important:
– Do not use aggressive cleaning agents, rubbing alcohol or other chemical solutions. They damage
the housing and can cause the product to malfunction.
– Do not immerse parts in water.
13.1 Power unit
1. (If switched on) press the on/off button to switch the power unit off.
2. Remove any attachment (example: body massager attachment) from the power unit.
3. Clean the power unit with a dry, fibre-free cloth.
4. Use a vacuum cleaner or brush to clean the ventilation openings in the power unit.
13.2 Body massager
1. Remove the body massager attachment from the power unit.
2. Clean all parts with a dry, fibre-free cloth.
13.3 Scalp massager
1. Remove the scalp massager attachment from the power unit.
2. Remove any hair. Clean all parts with a dry, fibre-free cloth.
13.4 Hair dryer
1. Let the hair dryer attachment, nozzle, and diffuser cool down to room temperature.
2. Remove the hair dryer attachment from the power unit.
3. Clean all parts with a dry, fibre-free cloth.
4. Use a vacuum cleaner or a brush to clean the air intake grill and air outlet of the hair dryer attach-
ment.
14 Disposal
Electronic devices are recyclable waste and must not be disposed of in the household waste.
At the end of its service life, dispose of the product in accordance with applicable regulatory
guidelines.
You thus fulfill your statutory obligations and contribute to the protection of the environment.

15 Technical data

15.1 Appliance
Input ..................................................... 26 V/DC, 0.9 A
Power consumption .............................. max. 350 W
Rechargeable battery ........................... Li-ion rechargeable battery , 21.6 V, 2.0 Ah, 43.2 Wh
Battery recharging time ........................ max. 3 h
Operating temperature ......................... 0 to +40 °C
Operating humidity ............................... < 85 % RH
Storage temperature ............................. 0 to +40 °C
Storage humidity ................................... < 85 % RH
Dimensions (W x H x D) (approx.) ........ 76 x 257 x 152 mm
Weight (approx.) ................................... 1.8 kg (including accessories)
15.2 Charger
Input ..................................................... 26 V/DC, 0.9 A
Output.................................................... 26 V/DC, 0.9 A
15.3 Power adapter
Input ..................................................... 100 - 240 V/AC, 50/60 Hz, max. 0.8 A
Output ................................................... 26 V/DC, 0.9 A
6
Suggested solution
Let the power unit cool down for
30 minutes, then restart.
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming or the capture in
electronic data processing systems) requires prior written approval from the editor. Reprinting, also in part, is prohibited.
This publication reflects the technical status at the time of printing.
Copyright by Conrad Electronic SE.
*2379911_V1_0921_jh_mh_en I2/O1

Werbung

loading

Diese Anleitung auch für:

Fd-4in1-a