4)In order to obtain bright and clear image, the illumination must be
adjusted. When different objective is chosen, you should adjust the iris
diaphragm of the condenser and different brightness of the light.
5)When the lamp needs to replace, you should shut off the power
switch and replace it after the lamp is cool. Note: The contact must
be firmed, and the filament center should be adjusted.
Ⅴ. Maintenance
1. Open the package carefully to avoid the damage of the lenses or
accessories.
2. Operate correctly, and put the dust cover on the microscope after work.
3. Don't dismantle the instrument rashly besides the replaceable lest the
correct position should be breached.
4. Keep the instrument in dry and cool place and away from the pollution
and corrosion.
5. Please send the instrument to the special repair shop if it goes out of order.
6. When the objectives and eyepieces won't be used for a long time,
please place them into a dry box, and put the dust cover onto the
microscope.
VI. Full set of the instrument
1
Mainframe of bio-microscope
2
Eyepiece: WF10X,WF25X
3
Triocular head&Connecting pipe
4
Achromatic Objective:4X,10X,40X,100X
5
Operation Manual
-6-
AFS-B108-US
1 set
2 pc of each
1 pc
1 pc of each
1 copy