Marmitek IP Eye Anywhere 10 Kurzinstallationsanleitung Seite 5

Connecting the IP Camera to LAN
Use the provided Ethernet cable to connect the camera to your local area network (LAN).
When you connect the AC power adapter, the camera is powered on automatically. You can
verify the power status from the Power LED on the front panel of the camera.
Once connected, the Link LED starts flashing green light and the camera is on standby and
ready for use now.
Connecting the Ethernet cable
Connecting the Camera to WLAN
If you use a wireless network in your application environment, you need to attach the
included external antenna to the camera.
When the camera is powered on, the camera will automatically search any access point with
"default" SSID.
Connecting the
External Antenna
NOTE If the camera cannot connect to your wireless network, you need to install the camera
in LAN and proceed with WLAN settings.
IP EYE ANYWHERE™ / IP ROBOCAM™ 5