Marmitek IP Eye Anywhere 470 Kurzinstallationsanleitung Seite 5

1 2 Installing the Camera
Basic Installation (Surface)
The camera can be mounted to the ceiling surface directly by
the following steps:
1. Remove the Dome cover by
unscrewing four screws.
2. Drill three mounting holes into the ceiling and hammer the
plastic anchors into the holes.
You can drill the three mounting holes precisely with the
provided drill template. Put the drill template on the
location where you want to install the camera, and then
drill the mounting holes according to the marked position
on the drill template.
IPEyeAnywhere 470 ™
5