Werbung
Verfügbare Sprachen
Verfügbare Sprachen
1. (Illustration 1) VT-3530M head
2. Quick release plate taking out
(Illustration 2) Loosen quick release plate by twisting the knob.
(Illustration 3) Quick release plate can be taken out by pressing the button knob. Wide
quick release plate can ensure the complete touch with the equipment, which enhances
the stability. (There is security device with the quick release plate. Plate will not drop off
even though the knob is unlocked. In the condition of unlocking, you can front- back
slide the quick release plate to adjust the equipment balance, which length is about
7cm.)
3. Mounting head on tripod
(Illustration 4) Mount the head thread hole onto the tripod screw, rotate it till the head
completely touches with the tripod loading plate.
4. Tilting and rotating
(Illustration 5) Loose the knob, the head can be tilted. On the contrary, lock the head.
Speedy shooting and super locking force, it can make sure the equipment's safety and
stability.
5. Dynamic Balance
As pic shown, rotate the balance knob, the head tilts back to balance position
automatically. On the contrary, rotate the balance knob, the balance gear function
disappears.
6. Horizontal rotating
(Illustration 6) Loose the lock, the head can be 360° horizontal rotated. On the contrary,
lock the head.
7. Handle installing and position changing
(Illustration 7) Install the handle on one side of the head, lock it until it is fixed. If you
want to change the handle position, negative direction unscrew the knob, adjust the
handle direction, then install it on the other side of the head, screw it as the direction
shown.
13
Werbung
