Symbols On The Product; Know Your Product; Symbols In This Manual - Ryobi R15GN18 Bedienungsanleitung

Inhaltsverzeichnis

Verfügbare Sprachen

flow inside them. Corrosive or conductive fluids, such

as seawater, certain industrial chemicals, and bleach

or bleach-containing products, etc., can cause a short

circuit.

■

Ambient temperature range for battery during use is

between 0°C and 40°C.

■

Ambient temperature range for battery storage is

between 0°C and 20°C.

TRANSPORTING LITHIUM BATTERIES

Transport the battery in accordance with local and national

provisions and regulations.

Follow all special requirements on packaging and labelling

when transporting batteries by a third party. Ensure that

no batteries can come in contact with other batteries

or conductive materials while in transport by protecting

exposed connectors with insulating, non-conductive caps or

tape. Do not transport batteries that are cracked or leaking.

Check with the forwarding company for further advice.

KNOW YOUR PRODUCT

See page 67.

1. Air pressure dial

2. Battery port

3. Rear loading magazine

4. Handle, insulated gripping surface

5. LED light button

6. Pusher

7. Belt clip screw hole

8. Trigger switch

9. LED light

10. Depth of drive adjustment

11. Jam release

12. No-mar pad

13. Safety contact tip

14. Belt clip

15. Belt clip screw

16. Operator's manual

17. Battery pack

18. Charger

MAINTENANCE

■

The product should never be connected to a power

supply when assembling parts, making adjustments,

cleaning, performing maintenance, or when the product

is not in use. Disconnecting the product from the power

supply will prevent accidental starting that could cause

serious injury.

■

When servicing, use only original manufacturer's

replacement parts, accessories and attachments. Use

of any other parts may create a hazard or cause product

damage.

■

Avoid using solvents when cleaning plastic parts. Most

plastics are susceptible to various types of commercial

solvents and may be damaged by their use. Use clean

cloths to remove dirt, carbon dust, etc.

■

Do not at any time let brake fluids, gasoline, petroleum-

based products, penetrating oils, etc., come in contact

with plastic parts. Chemicals can damage, weaken or

destroy plastic which may result in serious personal

injury.

■

For greater safety and reliability, all repairs should be

performed by an authorised service centre.

Original Instructions