Herunterladen Diese Seite drucken

Axis M20-Serie Installationsanleitung Seite 5

Werbung

English
Safety information
Hazard levels
DANGER
Indicates a hazardous situation which, if not
avoided, will result in death or serious injury.
WARNING
Indicates a hazardous situation which, if not
avoided, could result in death or serious injury.
CAUTION
Indicates a hazardous situation which, if not
avoided, could result in minor or moderate
injury.
NO TICE
TICE
NO
NO
TICE
Indicates a situation which, if not avoided,
could result in damage to property.
Other message levels
Important
Indicates significant information which is
essential for the product to function correctly.
Note
Indicates useful information which helps in
getting the most out of the product.
Safety instructions
NO TICE
TICE
NO
NO
TICE
The Axis product shall be used in compliance
with local laws and regulations.
Axis recommends using a shielded network
cable (STP).
Axis recommends using a network cable of
category CAT5e or higher.
Store the Axis product in a dry and
ventilated environment.
Avoid exposing the Axis product to shocks
or heavy pressure.
Do not install the product on unstable
poles, brackets, surfaces or walls.
Use only applicable tools when installing
the Axis product. Using excessive force
with power tools could cause damage to
the product.
Do not use chemicals, caustic agents, or
aerosol cleaners.
Use a clean cloth dampened with pure
water for cleaning.
Use only accessories that comply with the
technical specification of your product.
These can be provided by Axis or a third
party. Axis recommends using Axis power
source equipment compatible with your
product.
Use only spare parts provided by or
recommended by Axis.
Do not attempt to repair the product
yourself. Contact Axis support or your Axis
reseller for service matters.
The power supply shall be plugged in to a
socket outlet installed near the product and
shall be easily accessible.
Use a limited power source (LPS) with a
rated output power limited to ≤100 W and
a rated output current limited to ≤5 A.
Transportation
NO TICE
TICE
NO
NO
TICE
When transporting the Axis product, use
the original packaging or equivalent to
prevent damage to the product.
Battery
The Axis product uses a 3.0 V BR1632A lithium
battery as the power supply for its internal
real-time clock (RTC). Under normal conditions
this battery will last for a minimum of five years.
Low battery power affects the operation of
the RTC, causing it to reset at every power-up.
When the battery voltage is low, a log message
will appear in the product's server report.
CAUTION
Do not replace the battery yourself. Contact
Axis support if the log message requests a
battery change.
Lithium coin cell 3.0 V batteries contain
1,2-dimethoxyethane; ethylene glycol dimethyl
ether (EGDME), CAS no. 110-71-4.
Français
Informations sur la sécurité
Niveaux de risques
DANGER
Indique une situation dangereuse qui, si elle
n'est pas évitée, entraînera le décès ou des
blessures graves.
AVERTISSEMENT
Indique une situation dangereuse qui, si elle
n'est pas évitée, pourrait entraîner le décès ou
des blessures graves.
ATTENTION

Werbung

loading

Diese Anleitung auch für:

M2035-leM2036-le