Description Of The Controls - Hyundai HB983 Bedienungsanleitung

• WARNING: There is a risk of injury in case of incorrect use (not in accordance with the manual) of
the appliance.
• All text in other languages and pictures shown on the packaging, or the product itself, are
translated and explained at the end of this language mutation.
• The producer does not undertake any responsibility for damage caused by improper use of
the appliance and the accessories (e.g. food deterioration, injury by knife edge, fire, etc.)
and its guarantee does not cover the appliance in the case of failure to comply with the safety
warning above.

DESCRIPTION OF THE CONTROLS

P1 Motor unit
P2 Switch I - speed 1
P3 Switch II Turbo
P4 Speed regulator (only HB983 model)
P5 Blender stick
P6 Measuring bowl
Accessories P6, P7, P8, P9, P10, P11, P12 only for type HB983.
INSTRUCTION FOR USE
Remove all the packing material and take out the drive unit and the accessories. Remove all
possible adhesion foils, stick–on labels or paper from the appliance. Before the first use, wash
the parts that will be in contact with food in hot water with a detergent, rinse them thoroughly
with clean water and wipe till dry, or let them dry.
Safety switch (P2, P3)
Button I – low speed
By pushing and holding the button you will start the appliance and by releasing the button you
will switch off the appliance.
Speed regulator (P4), (only for type HYUHB 983)
By turning the regulator you can continuously change the speed of the motor revolutions.
ACCESSORY INSTALLATION
Slide adapter to drive unit , then fix it by turning it. Remove the adapter in the opposite direction.
P4
P2
P3
P1
P5
P7 Container lid
P8 Blade gear box adapter
P9 Blade
P10 Chopper bowl
P11 Whisk
P12 Whisk gear box adapter
P8
P9
P10
Button II – maximum speed
28 / 50
P12
P11
P6
P7