Level Adjustment - Monacor IT-400DTM Bedienungsanleitung

6 Level adjustment

The speaker itself has no control elements . The
volume is adjusted via an audio signal from a
Dante signal source (transmitter) with a corre-
sponding digital level value .
Only set the signal level at the signal source to
such a value that the sound from the speaker
is not distorted .
CAUTION Never adjust the audio system to
a very high volume . Permanent
high volumes may damage your
hearing!
All rights reserved by MONACOR
No part of this instruction manual may be reproduced in any form or by any means for any commercial use.
10
INTERNATIONAL GmbH & Co. KG.
®
7 Specifications
System: . . . . . . . . . . . . . . 2-way system
Frequency range: . . . . . . 100 – 20 000 Hz
Speaker configuration
Bass speaker: . . . . . . . . ⌀ 16 cm (6")
Tweeter: . . . . . . . . . . . ⌀ 25 mm (1")
Sensitivity: . . . . . . . . . . . . 98 dB / W/m
Max . SPL: . . . . . . . . . . . . 113 dB
Radiation angle
horizontal: . . . . . . . . . . 100°
vertical: . . . . . . . . . . . . 60°
Amplifier power
(nominal power): . . . . . . 30 W
Dante input signal
Number of channels: . . 1
Resolution: . . . . . . . . . 16 – 32 bits
Sampling rate: . . . . . . . 44 .1 – 96 kHz
Data interface
Ethernet: . . . . . . . . . . . RJ45 jack
Power supply
Power over Ethernet: . . PoE+
Admissible
ambient temperature: . . . −20 °C to +50 °C
Housing: . . . . . . . . . . . . . ABS
IP rating: . . . . . . . . . . . IP 66
Mounting bracket: . . . . . stainless steel
Dimensions
Width: . . . . . . . . . . . . . 420 mm
Height: . . . . . . . . . . . . 335 mm
Depth: . . . . . . . . . . . . . 400 mm
Weight: . . . . . . . . . . . . . 6 .1 kg
Subject to technical modification .
in accordance with
IEEE 802 .3at-2009