Operating Mode; Programming Mode - Baumer N208 Betriebsanleitung

N 208
Operating mode In the operating mode, it is possible to read
To read off ➜ Read off the display.
To reset ➜ Press the
Programming mode Operating parameters are set in the
Activating ➜ Press the
programming
28

4 Operating mode

The operation and use are described in this
section.
● As soon as the voltage supply has been
switched on, the counter is automatically
ready to operate.
off and reset the current counter display.
Current value display

5 Programming mode

This section describes the procedure for
programming.

programming mode.

until a broken line appears in the display.
● To transfer from the operating mode to
the programming mode:
Press the
Press the
Default settings are always printed with *.
● Programming lines are selected in suc-
cession. The input is stored when the
next programming line is called up.
www.baumer.com
button.
button for approx. 10 s
button for a minimum of 1s
button briefly