Herunterladen Inhalt Inhalt Diese Seite drucken

Orieme Visio Bedienungsanleitung Seite 11

Inhaltsverzeichnis

Werbung

When low battery occur then appear on the display the symbol
. Change the
batteries in few minutes and the swing and the setting temperature remain in
memory.
Ein schwacher Batteriezustand wird im Display mit dem Batteriesymbol
angezeigt. Wenn der Batterie-Wechsel zügig durchgeführt wird, bleiben alle
Einstellungen (Temperatur, Differential) gespeichert.
Funzione RESET / RESET function / RESET MODUS
Premendo il tasto Reset, presente sulla scheda elettronica, il termostato ritorna
nelle condizioni iniziali di base con le temperature impostate che rimangono
inalterate (non si cancellano) e quindi come da impostazione dell'utente. Inoltre
viene attivato il funzionamento Differenziale come da impostazione con il jumper.
When press the Reset key, on the electronic board (pcb), the thermostat will go
on the basic conditions: the values of the temperature comfort will be as the user
has programmed. Besides it will be switch on the right Swing mode as from the
jumper pin.
Beim Drücken der Reset Taste auf der Leiterplatte, kehrt der Thermostat in den
ursprünglichen Betriebszustand zurück, wobei die von Ihnen eingestellten
Temperaturwerte unverändert bleiben.

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis